Main advantages 

Fully automatic continuous tyre pyrolysis machine is a significant improvement based on the existing batch type pyrolysis plant at home and abroad. 

1.Fully automatic with low labour cost
Our continuous tyre pyrolysis machine is controlled by PLC system with automatic feeding and discharge system, which only need 1-2 worker for operating the PLC or computer is ok.

2.Fully pyrolysis for high oil output
Our continuous tyre pyrolysis machine adopts mutiple reactor design which can make fully pyrolysis of waste tires, thus to get high oil output.

3.Big capacity
Also due to continuous feeding and discharge system, and unique mutiple reactor design, our continuous tyre pyrolysis machine can process at least 10 tons waste tires per day, up to 100T/D; and we can make bigger capacity machine according to customer require, like 200T/D and 300T/D.

4.Internal rotating for conitnuous operation
For external rotating system, you have to change the sealing material every three days, thus cannot achieve the real sense of continuous process. But our continuous tyre pyrolysis machine pyrolysis reactor adopts internal rotating method, which no need to worry about the sealing of the external rotating system.

5.Continuous working save time and energy

With the automatic and continuous feeding and discharge system, it can make the pyrolysis system keep running 24/7 without stop, thus to save the valuable time and energy which are consumed in the batch manual operation system.

6.Long working life

During the continuous pyrolysis process, reactor heating is by indirect hot air heating, which will not damage reactor so much, thus to keep long usage life of the reactors, reactor can prolong 5-6 years life than the batch type pyrolysis plant.

The whole fully automatic continuous tyre/plastic pyrolysis machine composite by 13 parts, those are reactor ,driving device ,vertical catalytic chamber, vertical condenser, oil and water separator, horizontal condenser ,heavy oil tank ,light oil tank , anti-back fire device, vacuum system , dedusting device, draft fan, chimney.

Reactor is one of the most important parts. The material and welding technology of reactor will have a direct impact on safety and durable life. In order to guarantee the quality of reactor, we use auto welder .The welding seam will get X-ray detection and heating treatment.

Condensers adopt water cooling way and the inner cooling tube are made of seamless steel pipe ,the diameter is 48mm.the heat exchanging area is about 13 square meter ,the total heat exchanging area is 40 square meter to get the best temperature for oil gas liquefied.