Raw material
1. Waste rubber: waste tire, waste cable skin, waste sole, etc.
2. Waste plastic except PET: industrial plastic, household garbage, etc.
3. Medical waste.
| No. | Item | Technical Parameter |
| 1 | Suitable Raw Material | plastics chips size around 100x100mm |
| 2 | Operation Mode | fully continuous operation |
| 3 | Structure | horizontal type |
| 4 | Loading and Discharging | fully automatic feeding and discharging |
| 5 | Capacity(24h) | >=30Mt/Day (customized) |
| 6 | Work Pressure | normal pressure(slightly negative) |
| 7 | Oil Yield | 43~48% |
| 8 | Power | 50~60kw/h |
| 9 | Cooling System | cycle water |
| 10 | Heating System | hot air |
| 11 | Noise | <=85(dB) |
| 12 | Main Reactor Weight | 40Mt |
| 13 | Installation Space Required | 48mx20m |
Technology Advantages
1) The real advanced industrial continuous pyrolysis production mode with large capacity
2) Exlusive low temperature catalyst technology
3) Exlusive heat dispersion technology
4) Exlusive anti-coking techbology
5) Exlusive hot air conseal technology
6) Exlusive gas purification and heat recovery tech nology
7) Emission in compliance with EEA standards in EU and EPA standards in USA
8) Whole line PLC smart control system
9) Few staff required
Oil Yeild of Different Plastic
oil yield of different plastic | |
PE/ldpe/pe | 50%-75% |
PP | 50%-75% |
PS | 50%-75% |
ABS | 40% |
Leftovers of paper | wet 15-20%, dry 60% |
House garbage | 35-50% |
Plastic cable | 80% |
Plastic bag | 50% |
Submarine cable | 75% |
Rubber cable | 35% |
Sole | 35% |
PVC | NA |
PET | NA |
